Product

Huaibei Traffic Control

A company dedicated to the research, development and application of new support and reinforcement technology and products

※ Your current location:Home - Product - WJJG-3, an inorganic reinforced two-component quick-setting material for mining
prev
next

WJJG-3, an inorganic reinforced two-component quick-setting material for mining

Update time:2022-12-12

This product is a kind of two-component inorganic powder, fast setting, early strength, the use of grouting pump into broken coal rock mass, fast reinforcement of loose coal rock mass, prevent flake

  • product details

一、Product overview

This product is a kind of two-component inorganic powder, fast setting, early strength, the use of grouting pump into broken coal rock mass, fast reinforcement of loose coal rock mass, prevent flake. It can be used for grouting reinforcement of coal working face, fault grouting reinforcement of working face, grouting reinforcement of small coal pillar along goaf (no need to advance grouting), full anchor support of roadway affected by high stress and mining (including original support), it can also be used for filling reinforcement of mountain, tunnel, brick wall, concrete, as well as non-flowing sand and other ground reinforcement without bearing capacity. It is mainly used for reinforcement of broken roof and coal seam in mining face and can replace polymer materials used for reinforcement of coal and rock mass.

二、Scope of application

It is suitable for rapid reinforcement of coal and rock mass in crushing working face

It is suitable for the advance and pre-reinforcement of coal rock mass during the coal uncovering period of roadway driving

It is suitable for the surrounding rock reinforcement during the period of overfault and geological structural belt

It is suitable for grouting reinforcement of loose coal wall, coal pillar and roadway roof and floor

It is suitable for grouting reinforcement of closed wall and surrounding broken coal rock mass. It is suitable for advance grouting reinforcement when faults and collapse columns are encountered during tunneling

三、Product characteristics

High compressive strength and fast solidification reaction time

The temperature is low during the reaction

Flame retardant, antistatic

No shrinkage, micro expansion, good permeability

Pumpable, fast initial setting, high strength, corrosion resistance

Durable adhesion is strong

四、 Main performance index

The product is packaged in plastic film bags, each bag weighs 25kg net. It shall not be exposed to moisture during transportation and storage, and should be handled with care during loading and unloading to prevent packing damage. The product is stored unopened in a cool and dry place for 6 months

3.1.jpg

四、 Product application

3.2.jpg

News you may be interested in POPULAR INFORMATION